auth-etailer-logo

Skunk2 LCA's

Skunk2’s Rear Lower Control Arms are based off of the same technology the company’s been using on its own race cars for more than a decade and are a must-have for enthusiasts looking to fine-tune their suspension for maximum handling performance. Skunk2’s Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. Each arm is forged from aircraft-quality 2024 billet aluminum, precision CNC-machined, and is more than 25 percent lighter than the OEM arms. Skunk2 Rear Lower Control Arms also feature adjustable anti-sway bar mounting holes for advanced suspension tuning and optimum balance.

Skunk2 '88-'95 Civic / CRX, '90-'01 Integra Alpha Series Clear Anodized Rear Lower Control Arms

Skunk2 Racing Part # 542-05-1105

Skunk2 '88-'95 Civic / CRX, '90-'01 Integra Alpha Series Gold Anodized Rear Lower Control Arms

Skunk2 Racing Part # 542-05-1110

Skunk2 '88-'95 Civic / CRX, '90-'01 Integra Alpha Series Black Anodized Rear Lower Control Arms

Skunk2 Racing Part # 542-05-1195

Skunk2 '88-'95 Civic / CRX, '90-'01 Integra Ultra Series Clear Anodized Rear Lower Control Arms

Skunk2 Racing Part # 542-05-2105

Skunk2 '88-'95 Civic / CRX, '90-'01 Integra Ultra Series Gold Anodized Rear Lower Control Arms

Skunk2 Racing Part # 542-05-2110

Skunk2 '88-'95 Civic / CRX, '90-'01 Integra Ultra Series Black Anodized Rear Lower Control Arms

Skunk2 Racing Part # 542-05-2195

Skunk2 Lower Control Arms 1988-95 CIVIC/ CRX/ DELSOL EF/EG & Integra 90-01

Skunk2 Lower Control Arms for the EF, DA, EG, and DC2 chassis also feature adjustable sway bar mounting holes so you can fine tune the feel and balance of the rear suspension.

• Features that Set Skunk2 Apart from the Competition
• Three Durable Anodized Finishes (JDM Gold, Gun Metal, and Clear CNC)
• CNC Machined from Forged AL-2024 Aluminum
• I-Beam Design for Maximum Strength and Resistance to Twisting and Bending
• Finite Element Analysis (FEA) for Strength and Performance
• Adjustable Sway Bar Mounting Holes (EF, DA, EG, DC2, and EK Chassis Only)
• Low Deflection Polyurethane Bushings that Act like Bearings
• Over 25% Lighter than Stock

Skunk2 Lower Control Arms 1996-00 CIVIC EK

Skunk2 Lower Control Arms for the EF, DA, EG, and DC2 chassis also feature adjustable sway bar mounting holes so you can fine tune the feel and balance of the rear suspension.

• Features that Set Skunk2 Apart from the Competition
• Three Durable Anodized Finishes (JDM Gold, Gun Metal, and Clear CNC)
• CNC Machined from Forged AL-2024 Aluminum
• I-Beam Design for Maximum Strength and Resistance to Twisting and Bending
• Finite Element Analysis (FEA) for Strength and Performance
• Adjustable Sway Bar Mounting Holes (EF, DA, EG, DC2, and EK Chassis Only)
• Low Deflection Polyurethane Bushings that Act like Bearings
• Over 25% Lighter than Stock

Skunk2 Lower Control Arms '02-'06 Acura RSX

Skunk2’s Rear Lower Control Arms for the ’02-’06 RSX and '03-'08 Element are based off of the same technology the company’s been using on its own race cars for more than a decade and are a must-have for enthusiasts looking to fine-tune their suspension for maximum handling performance.

Skunk2 Lower Control Arm Civic Si (EP3), Civic Sedan / Coupe (EM/ES), and Element

Skunk2 Lower Control Arms for the EF, DA, EG, and DC2 chassis also feature adjustable sway bar mounting holes so you can fine tune the feel and balance of the rear suspension.
Skunk2 Lower Control Arms for the EP3, DC5, EM, ES and YH3 chassis feature unique steel mounting plates to evenly distribute the clamping force of the Skunk2 hardware, eliminating the tendency to over stress the material and eventually loosen over time. Included in the Hardware Kit you will find a Skunk2 embossed socket and 10 point zinc plated bolts. The socket is used to remove the OEM hardware as well as install the New Skunk2 Hardware.

• Features that Set Skunk2 Apart from the Competition
• Three Durable Anodized Finishes (JDM Gold, Gun Metal, and Clear CNC)
• CNC Machined from Forged AL-2024 Aluminum
• I-Beam Design for Maximum Strength and Resistance to Twisting and Bending
• Finite Element Analysis (FEA) for Strength and Performance
• Adjustable Sway Bar Mounting Holes (EF, DA, EG, DC2, and EK Chassis Only)
• Low Deflection Polyurethane Bushings that Act like Bearings
• Over 25% Lighter than Stock
• Special Zinc Plated Steel Mounting Plates, Hardware, and Skunk2 Tool (EP3, DC5, EM, ES and YH3 Chassis Only)

Skunk2 06-11 Civic Rear Camber Kit (New Spherical Joint Design) Hard Anodized

Skunk2 Part # 516-05-0620 
Skunk2 Racing Adjustable Rear Camber Kit (Hard Anodized), for Honda Civic 06-11 (All Models)

Skunk2 06-11 Civic Rear Camber Kit (New Spherical Joint Design)

Skunk2 Part # 516-05-0625
Skunk2 Racing Adjustable Rear Camber Kit (Gold Anodized), for Honda Civic 06-11 (All Models)

Skunk2 Lower Control Arm Dress-Up Washers

The first of their kind and only available from Skunk2, Lower Control Arm Dress-Up Washers for most ’88-’00 Civics and ’90-’01 Integras are available in black, blue, gold, purple, red, and clear hard-anodized finishes. Lower Control Arm Dress-Up Washers substitute the factory lower control arm hardware with tapered, OEM-grade socket-head bolts flush-mounted inside of our unique aluminum washers. Each Lower Control Arm Dress-Up Washer kit includes six washers and six bolts that are compatible with most lower control arms, including Skunk2’s.

Skunk2 EG/DC2 Front LCA with Spherical Bearing

Skunk2 Front Lower Control Arms EG/ DC2 Part # 542-05-M440
Application 1992 - 1995 Honda Civic (CX, DX, EX, LX, Si, VX)1994 - 2001 Acura Integra (GS, GS-R, LS, Type R)

Skunk2 EK Civic Front LCA with Spherical Bearing

Skunk2 Front Lower Control Arms EK Part # 542-05-M540
Application 1996 - 2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si)