Save on this Innovative Mount kit for a limited time

Innovative Mounts 90-93 Acura Integra H22 Mount Kit

Innovative Mounts
Add to cart
  • Description
  • More

Innovative Mounts Part # 29354 With this Innovative Mount kit, you can now put an H22 into your 90-93 Integra with very little modification. Designed to fit all H/F Series motors. Positions the motor with no axle bind. Advanced Actuator pivots smoothly using state of the art spherical bearings. The actuator is mounted in the same fashion as the factory models and works in the same plane as the clutch release fork. There is no binding in the clutch release fork and therefore no premature clutch wear caused by the actuator.

Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty.

**Free Standard Shipping

This kit includes three mounts (Driver's side Engine Mount, Passenger Side Transmission Mount, Rear Mount) a Passenger's Side Transmission Mount Frame Bracket, and Innovative's 41003 Cable to Hydro Actuator.

Factory mounts are usually made of thin gauge metal stamped and partially inserted with a rubber material. The rubber usually has two or more sections that meet in the center to hold the center pin. These sections do not hold the motor firmly and are prone to break under sever driving conditions and/or when used in performance applications.

Innovative Mounts has engineered a unique polyurethane bushing unlike no other. Their bushings are solid, will never wear or break, and come with a life time unconditional warranty. A key design decision in Innovative bushings is that it makes minimal physical contact with the mounting bracket or chassis. The shape of the urethane bushing is tapered to prevent binding between the chassis and/or mounting bracket. This allows the urethane to gradually absorb engine movement and vibration.

All of Innovative bushings are designed in the same general shape. What varies next is the hardness or durometer rating of the urethane.

60A Red - The 60A Red bushings are recommended for street cars. Most of our kits come standard with these bushings. They provide the least amout of vibration transfered from the engine to the chasis. This equates to a more comfortable everyday ride.

75A Black - The 75A Black bushings come standard on all H/F - Series engines. These engines weigh more and need a stronger bushing. We recommend 75A for street and track vehicles that make more than average horsepower. This rating of bushing is also for those that would like a stiffer feel and less engine flex.

85A Grey - The 85A Grey bushings is designed specifically for race cars or drivers that seek a solid engine mount kit.

95A Red -  The 95A Red  Extreme pretty much race only... Figure these bushings are 95 out 100% solid.

Please Note: This Innovative Mounts product is sometimes made upon order. Therefore, please allow at least 10 business days for shipment. If you would like to check the availability of a specific part, please e-mail us or give us a call.