NOTE: Does NOT work with JDM K20A throttle or BDL Performance throttle bodies. This will ONLY work with North American K20A2 and K20Z1 throttle bodies.

K-Tuned Part # KR-FRF-303
For use with all K-Tuned fuel rails.

K-Tuned Part # KR-CEN-0
For use with K-Tuned fuel rails only

K-Tuned Part # KTD-HS-06

K-Tuned Part # KTD-FPR-
Application: 92-95 Civic / 94-01 Integra, 96-00 Civic

K-Tuned Part # KTD-FPR-KFR
Note: Only fits K-Tuned k-series fuel rail

Hybrid Racing Part # HYB-FPR-00-05
• Piston-type design provides pressure damping
• Teflon coated, hard anodized, 6061 aluminum construction
• Stainless steel cap and hardware
• -8 Inlet/Outlet Ports
• -6 Return Port
• 1/8 NPT gauge port
• Includes all fittings needed to attach to -6AN fuel lines
• Includes mounting hardware
• Adjustable from 30PSI - 100PSI

AEM Part # 25-302BK . Adjustable Fuel Pressure Regulator (Black), for Universal Applications

Hybrid Racing Part # HYB-CAI-01-14
Full Silicone Construction
Most powerful RSX Intake on the market
True 3-inch tube design
Includes 3" velocity stack & filter
Requires the use of 70mm TB
Requires the RBC / RRC intake manifold

Hybrid Racing Part # HYB-CAI-01-02
• Full 3"/76mm inner diameter.
• Glass-reinforced silicone construction.
• Designed to keep intake air cold.
• Includes filter and all mounting hardware.
• Stainless steel t-bolt clamp.
• Works with PRB, RBC & RRC manifolds.
• Cleanest intake on the market.

K-Tuned Part# KTD-CA

K-Tuned Part# KTI-RAM-
The K-Tuned Ram Air Intake is the best K-swap intake in the industry.
NOTE: Only fits K-Swap cars (EG/DC2 or EK w/EKK2 mounts) using our passenger rad kit and RBC/RRC manifold.

K-Tuned Part # KTD-SMB-K20 & KTD-SMB-K24
Applications:  K20A/A2/Z1/Z3 and all K24A Series engines.
Note: The K24 post bracket is based off the CRV bracket (11910-PPA-000) and will only fit applications using the similar. Will work with most K24-Swapped vehicles including RSX and 8th Civic Si. (This will NOT fit Accord, TSX, Element chassis)

K-Tuned Part # KTD-PMB-K24
This K-Tuned K24 bracket is based off the CRV bracket (11910-PPA-000) and will only fit applications using the similar. Will work with most K24-Swapped vehicles including RSX and 8th Civic Si. (This will NOT fit Accord, TSX, Element chassis)

Required when doing K24 Swaps. Genuine Honda Part

Hybrid Racing Part# HYB-BUN-01-88
Helps to eliminate grinds during hard shifts
OEM Honda master cylinder
Stainless steel braided clutch line
Improves the feel of gear changes
OEM Slave Cylinder (NON-DAMPENED)

K-Tuned Part # KPB-K20-500-2
For All K20 engines

K-Tuned Part # KPB-K24-501
For All K24 engines