Skunk2 Honda B-Series Ultra BMF TLRC Stage 1 Camshaft Set for Honda/Acura B16A/B17A/B18C VTEC Engines Part # 305-05-8000

Skunk2 Part# 348-05-0300
The Skunk2 VTEC rocker set provides an affordable replacement for OEM Honda rockers. In addition to being OEM compatible, Skunk2 has also made additional improvements to both the materials and design. Skunk2 incorporates an extended radius wear pad on all three rockers which allows for larger profiles to be used when compared to OEM rockers. Additionally, the Skunk2 radius pad is made from the latest in powdered metallurgy that provides exceptional wear resistance with reduced friction.

Brian Crower Part# BC0013
BC Camshaft Set of 2 for B-Series VTEC NA Applications

Skunk2 Ultra Series Cam Shaft Set (Stage- 1), for Honda K20C1 Civic Type-R Turbo VTEC Engines Part # 305-05-9100

Skunk2 Ultra Series Cam Shaft Set (Stage- 2), for Honda K20C1 FK8 Civic Type-R Turbo VTEC Engines Part # 305-05-9200

Skunk2 Honda K20C1/K20C4 Ultra Valve Springs and Spring Base Kit
Skunk2 Part# 313-05-9100

Skunk2 Part# 348-05-0400
The Skunk2 VTEC rocker set provides an affordable replacement for OEM Honda rockers. In addition to being OEM compatible, Skunk2 has also made additional improvements to both the materials and design. Skunk2 incorporates an extended radius wear pad on all three rockers which allows for larger profiles to be used when compared to OEM rockers. Additionally, the Skunk2 radius pad is made from the latest in powdered metallurgy that provides exceptional wear resistance with reduced friction.

Skunk2 Part# 312-05-0150
-32 Pieces (Enough for 16 Valves)
-Work w/ Factory and Aftermarket 5.5mm Valves
-7 Degree  Tapper
-Works w/ Most OEM and Aftermarket Retainers

Skunk2 Part# 305-05-9500
Skunk2 Ultra Stage 2 Camshafts for the L15B7 are designed as a street/strip cam that begins to make power after 3500rpm. Torque steadily increases from 3500rpm to a maximum gain of +30lb-ft at 4800rpm, and then holds +20lb-ft gain all the way to redline. Horsepower reaches a peak gain of +30hp from 5600rpm to redline. Stage2 cams require high-lift valve springs.

Skunk2 Part# 305-05-9400
Skunk2 Ultra Stage 1 Cams for L15B7 are designed as a ‘drop-in’ cam and make +15-20 hp and +20-30 lb-ft of torque from idle to 4200rpm, and +10hp  and +10 lb-ft of torque from 4200rpm to redline. This cam is the an excellent street cam for drivers that want the greatest torque gains in the low to mid rpm ranges and moderate gains in the higher rpm range.

Skunk2 Part # 305-05-0205

Skunk2 Part # 305-05-0250 

Skunk2 Part # 305-05-0265

Skunk2 Part # 305-05-0260

Skunk2 Part # 305-05-0255