Innovative Mounts Part # 29354 With this Innovative Mount kit, you can now put an H22 into your 90-93 Integra with very little modification. Designed to fit all H/F Series motors. Positions the motor with no axle bind. Advanced Actuator pivots smoothly using state of the art spherical bearings. The actuator is mounted in the same fashion as the factory models and works in the same plane as the clutch release fork. There is no binding in the clutch release fork and therefore no premature clutch wear caused by the actuator.

Innovative Mounts Conversion mount kit for 1992-1995 Honda Civic (EG/EH/EJ), Del-Sol, and 1994-2001 Acura Integra DC. Designed to fit all H and F series motors and manual transmission. Also designed to work when converting automatic to manual transmission swaps. Innovative Mounts Part # 29550

Innovative Mounts Billet Conversion mount for 1992-1995 Honda Civic, Del-Sol, and 1994-2001 Acura Integra. Designed to fit H22 motors and transmissions. Also designed to work when converting automatic to manual transmission swaps. Innovative Mounts  Part # B29550

Innovative Mounts Transmission mount for a 29150, 29550, or 20050 kit.  Designed to fit all H/F Series motors. Please note that additional hardware may be required to properly install this mount. Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. Part # 20020

Designed for H-Series engines with a H-Series or F-Series hydraulic transmission when being installed in a cable type chassis. The actuator will convert from cable to a hydraulic transmission. 100% bolt in, no modifications required. Actuator mounts in front of the release fork. There is no binding or premature clutch/transmission wear. CAD/CAM Designed. Stress Analyzed. Lifetime warranty . Innovative Mounts part # 41003

Innovative Mounts Rear Engine Bracket for 92-95 Honda Civic, 94-01 Acura Integra, 93-97 del Sol with F/ H Series Engine Swap & Replacement Mounting Bracket for 1992-1996 M/T H22A Honda Prelude (BA/BB)
Innovative Mounts Part # 59630

Innovative Mounts H Series Alternator Relocator Bracket is designed to relocate an H Series Alternator. Ideal for all H Series swaps and H2B conversions. Lowers the factory H22 Alternator to where the AC compressor was originally mounted. Fits both standard and 1/2" offset for use in applications where balancing shafts have been removed. Lifetime warranty. Note: Uses a 32" belt. Part # 59185

Innovative Mounts H-Series & F-Series Swap Axles for 94-01 Acura Integra (DC) with an F-Series or H-Series Engine Swap

Innovative Mounts H-Series & F-Series Swap Axles for 90-93 Acura Integra (DA/DB) with an F-Series or H-Series Engine Swap