ACL Part# 1T1957-STD
ACL Thrust washers, very commonly replaced when rebuilding your engine.  One package contains 2 halves and is all that is needed for one engine.

Cometic Part # C4237-030
Honda/Acura B-Series Hybrid 4 CYL 81mm MLS Head Gasket. Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating.Compressed thickness is .030". Non-VTEC block w/VTEC Heads.Each

Cometic Part # C4193-030
Honda/Acura B-Series Hybrid 4 CYL 84mm MLS Head Gasket. Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a viton rubber coating.Compressed thickness is .030". Non-VTEC block w/VTEC Heads.Each

Honda Part# 08718-0004
-High-temperature silicone liquid gasket.
-Unique formula is non-acidic and won't corrode aluminum like other silicon gasket products will.
-For use in applications not requiring solid gaskets.

Honda Part# 08717-1194
-Semi-drying liquid gasket.
-Seals irregular surfaces with a tough, elastic film.
-Solvent-based for easy removal; also resists gasoline.

Nippon Racing B-Series oil pumps are designed for high output and volume capabilities required with high RPM performance engines. All pumps are individually inspected and tested.

Nippon Racing Full Floating High Strength Spiral Lock Wrist Pin Clips. Set of 8 for 4 pistons. Available for B-Series, H-Series, D-Series and K-Series Nippon Racing Pistons.

The Circuit Hero Bolt-in K Series Oil Pan Baffle is a unique product that easily installs between the OEM Wind-age Tray and Oil Pan Floor. The baffle extends deep into the oil pan, dividing the sump into three sections, with the largest section surrounding the oil pumps pickup. The dividers section off the sump so as to keep oil from moving aggressively from one side of the pan to the other during hard corning. The open top design still allows adequate return oil flow to the pan. The design is simple and effective... it keeps the pickup submerged longer during aggressive driving.
Circuit Hero Part Number: CH-OPB-K

Scat Part# 4-HONDA-89MM-1771-2 (4H891-2)
Honda B-Series 4-Cylinder
3.504''/89mm Stroke. 29 LBS, 1.771 Rod Journal

Torque Solution Part# TS-HA-005

Skunk2 Part# 312-05-0150
-32 Pieces (Enough for 16 Valves)
-Work w/ Factory and Aftermarket 5.5mm Valves
-7 Degree  Tapper
-Works w/ Most OEM and Aftermarket Retainers

Circuit Hero Part# CH-BOPB-K
The Circuit Hero Billet K-Series Oil Pan Baffle is a unique product that easily installs on the oil pan floor and keeps oil nearby the oil sump arm preventing oil starvation and protecting engine components. Oil flows freely by utilizing five (5) doors and is designed to keep the engine lubricated during hard acceleration, cornering, and braking.

Skunk2 Part# 348-05-0400
The Skunk2 VTEC rocker set provides an affordable replacement for OEM Honda rockers. In addition to being OEM compatible, Skunk2 has also made additional improvements to both the materials and design. Skunk2 incorporates an extended radius wear pad on all three rockers which allows for larger profiles to be used when compared to OEM rockers. Additionally, the Skunk2 radius pad is made from the latest in powdered metallurgy that provides exceptional wear resistance with reduced friction.

Skunk2 Part# 348-05-0300
The Skunk2 VTEC rocker set provides an affordable replacement for OEM Honda rockers. In addition to being OEM compatible, Skunk2 has also made additional improvements to both the materials and design. Skunk2 incorporates an extended radius wear pad on all three rockers which allows for larger profiles to be used when compared to OEM rockers. Additionally, the Skunk2 radius pad is made from the latest in powdered metallurgy that provides exceptional wear resistance with reduced friction.

Hastings Sport Compact Race Series SNH Honda/ Acura B-Series Piston Rings

Skunk2 Pro Series Head Studs for the B16, B17, B18, K20, and K24 VTEC (except K24Z7 Series) engines are manufactured from a premium grade 8740 chromoly steel that yields a tensile strength of 190,000 PSI!
Skunk2 Part# 661-05-0001

NPR Part# SWH30362ZZ
Nippon Piston Ring OEM Replacement Piston Ring Set. Complete Set of D16A/ D16Z6 NPR Piston Rings. This set will also fit all Honda D-Series Engines with Nippon Racing pistons and a Standard 75mm bore size.