rcinjectors

RC Fuel Injectors

RC Engineering is the world's leading supplier of made-to-order, high-performance, electronic fuel injectors. RC injectors are available for a wide range of automotive, motorcycle and marine engines used in high-performance or racing applications.

Injectors are classified into two categories.
1.  High impedance/resistance (saturated) 12-16 Ohms.
2.  Low impedance/resistance (peak & hold) 0.5-6 Ohms.

Saturated injectors require roughly 1-1.5 amps to open the injector.  Peak & hold injectors initially needs about 4-6 amps, and once open drops to roughly 2-3 amps to keep it open. 

ECU design will dictate the use of one or the other. 

Note: Most late model Honda/ Acura applications OBD1+ will use saturated injectors.

RC Engineering Saturated Fuel Injectors (4)

RC fuel injectors come is a variety of sizes for naturally aspirated vehicles to full race turbo applications. They are offered in high resistance saturated or low resistance peak and hold setup. Each RC injector is flow tested to insure proper flow before it is shipped. Each set ordered will include data results from each flow test. RC Engineering fuel injectors come with a one year limited manufacturer warranty.

RC Engineering Peak & Hold Fuel Injectors (4)

  RC fuel injectors come is a variety of sizes for naturally aspirated vehicles to full race turbo applications. They are offered in high resistance saturated or low resistance peak and hold setup. Each RC injector is flow tested to insure proper flow before it is shipped. Each set ordered will include data results from each flow test. RC Engineering fuel injectors come with a one year limited manufacturer warranty.