Fall Sale.. Save an extra $10 on any $140+ purchase w code FALL10

Hondata OBD1 ECU Socket Tester

Name: Hondata OBD1 ECU Socket Tester
Brand: Hondata
SKU: SOCKET-TESTER
Price: 50.00 USD
Availability: InStock

Hondata

Description

When preparing an ECU for S300/s200 (test s200 socketing using the supplied pins) installation it is very easy to make mistakes. Lifted tracks and dry joints can be very difficult to spot. This tester takes out all the guesswork. Simply plug it in and all LEDs will light up when the pins have a good connection. If a LED is not on, then you have a soldering or wiring problem on the respective pin.

Note: that the tester may not show an intermittent cold or dry solder joint, but it will flag the vast majority of installation problems.

Made in USA.

Hondata S300 v3

The s300 version 3 is a plug in module to the OBD1 factory Honda Engine Computer (not included) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features.

Hondata

Hondata modifies standard Honda engine computers (ECUs), adding features and expanding the capabilities of the ECU (e.g. for forced induction). These modifications are available either as a reflash, or a fully tunable system. Reflashes involve the ECU being sent to Hondata; programmable system require the ECU to be modified for pre-2006 vehicles, or an external programming interface for 2006 and later vehicles.

ECU Conversion Harnesses

Honda and Acura ECU Adapter and Jumper Harnesses.

Electronics

Wiring Harnesses, Sensors, Ignition and ECU Tuning

Engine Swaps & Builds

DIY Swap Tech

NRG Quick Release Help

PreOBD to OBD1 ECU Jumper Instructions

**Important Operational Message**

* WARNING: CANCER & REPRODUCTIVE HARM- www.P65WARNINGS.CA.GOV
**Some products may be OFF-ROAD USE ONLY. Always check Leagality of Aftermarket Products with your Local State, County, and/ or City Authorities Before Purchasing.