Pair of completely assembled Innovative Mounts axles for use in Honda Civic, CRX, & Del-Sol H22A Swaps. These Innovative Mounts axles are rated at 500 whp and no cores are needed.

Pair of completely assembled Innovative Mounts axles for use in 90-01 Acura Integra H22A Swaps. These Innovative Mounts axles are rated at 500 whp and no cores are needed.

Hasport Part # HP-EGH3AX

Hasport Part # EGH2AX
Chromoly Shaft Axle set for use with H-series engine swap 92-00 Civic/94-01 Integra with H2 kit and Hydro manual intermediate shaft

Hasport Part # EFHAX

Innovative Mounts Rear Engine Bracket for 92-95 Honda Civic, 94-01 Acura Integra, 93-97 del Sol with F/ H Series Engine Swap & Replacement Mounting Bracket for 1992-1996 M/T H22A Honda Prelude (BA/BB)
Innovative Mounts Part # 59630

Hasport Part # EGHRB / BBRB Rear Engine Bracket for '92-'95 Civic, '94-'01 Integra with F-Series H-Series Engine Swap.

H22A driver side bracket that bolts to the block under the timing belt cover and then to your driver's side mount. Fits all H-Series Motors H22A, H23A & F20B when doing a H-Series Swaps.

Evolution Industries H2B Version-1 Post Mount for 92-00 Honda Civic & 94-01 Integra H2B swaps using Evolutions H2B Mounts. This bracket is also known as a 90 degree bracket or driver's side post mount.

Evolution Industries H2B Version-2 Billet Aluminum Post Mount for 92-00 Honda Civic & 94-01 Integra H2B swaps using OEM or aftermarket direct replacement B-Series mounts. This bracket is also known as a 90 degree bracket or driver's side post mount.

Evolution Industries H2B Version Billet Post Mount for 88-91 Honda Civic & Honda CRX H2B swaps using Evolution's H2B Mounts. This bracket is also known as a 90 degree bracket or driver's side post mount.

Innovative Mounts Conversion driver side sub bracket for 1998-2002 Honda Accord H22. Works with the 20250 engine mount kit. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. Part # 20211-H22-SB

Do you have an engine swap in your Honda project car and it rubs the underside of the hood? Eliminate this problem with our all-new Password:JDM Billet Aluminum Hood Risers Kit. Our hood riser kits are machined in house, in the USA, and are available in your choice of anodized finish. Each spacer is laser etched with the Password:JDM Logo. Our kit includes two hood riser, and four zinc plated hex bolts. Our hood riser kit will raise your hood 3/4".

Hybrid Racing Part # HYB-TBR-01-05
• Allows use of RSX shifter and linkage on H-Swap.
• Allows use of Hybrid Racing Bolt-In K-Swap Shifter and Cables.
• Improved performance over OEM H-Series cables and shifter.
• Carbon steel construction with durable powder coat finish.

K-Tuned Part # KTD-H22-BKT
Fitment: Cable Bracket will fit all 1992 to 2001 H and F-Series transmissions. Also note that these kits are intended for use with a K-Series shifter on H or F engine swaps in the EG/DC2 and EK chassis.

Innovative Mounts H22 Conversion Kit for 88-91 Civic/ CRX. Designed to fit all H/F Series motors. The Included Advanced Actuator pivots smoothly using state of the art spherical bearings. The actuator is mounted in the same fashion as the factory models and works in the same plane as the clutch release fork. There is no binding in the clutch release fork and therefore no premature clutch wear caused by the actuator.  Innovative Mounts Part # 29150

Innovative Mounts Transmission mount for a 29150, 29550, or 20050 kit.  Designed to fit all H/F Series motors. Please note that additional hardware may be required to properly install this mount. Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. Part # 20020

Innovative Mounts Conversion mount kit for 1992-1995 Honda Civic (EG/EH/EJ), Del-Sol, and 1994-2001 Acura Integra DC. Designed to fit all H and F series motors and manual transmission. Also designed to work when converting automatic to manual transmission swaps. Innovative Mounts Part # 29550