Innovative Mounts Billet Conversion mount for 1992-1995 Honda Civic, Del-Sol, and 1994-2001 Acura Integra. Designed to fit H22 motors and transmissions. Also designed to work when converting automatic to manual transmission swaps. Innovative Mounts  Part # B29550

Innovative Mounts Conversion transmission bracket for 1996-2000 Honda Civic designed to fit H22 swaps. CAD/CAM Designed. Stress Analyzed. Lifetime warranty.
Part # 20020-SB

Innovative Mounts Conversion mount kit for 1996-2000 Honda Civic designed to fit H22 M/T swaps. Innovative Mounts Part # 20050
Billet Version also available

A highly recommended mount for all prelude swaps! Front mount for 1996-2000 Honda Civic. Designed to fit all H and F Series motors. Completely bolt on. Adds strength and rigidity to the chassis so as not to tear the frame. Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. Innovative Mounts Part# 20040

Innovative Mounts Part # 29354 With this Innovative Mount kit, you can now put an H22 into your 90-93 Integra with very little modification. Designed to fit all H/F Series motors. Positions the motor with no axle bind. Advanced Actuator pivots smoothly using state of the art spherical bearings. The actuator is mounted in the same fashion as the factory models and works in the same plane as the clutch release fork. There is no binding in the clutch release fork and therefore no premature clutch wear caused by the actuator.

MFactory Helical LSD H22 H23 F22 F23
MFactory Part# MF-TRS-05H22
Fitment: 1992-2002 Honda Accord F-Series and 1992-2001 Honda Prelude H22A

SFR Part# SF-01-018
SpeedFactory 4 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip.

Progress Competition Series Rear Sway Bar system for 88-91 Civic HB and CRX
Progress Technology Part# 62.1043

Function & Form Part# 38100217K
Track focused full-bodied coilovers
Variable damping matched with proper spring rates
High-strength JIS G3445 carbon steel shock body
Customizable spring rates
Quick install preload ready

SpeedFactory Racing’s precision cast 70mm Throttle Body for Honda B, D, F, and H series - bolt-on increased airflow, throttle response, and power gains on both naturally aspirated and forced induction applications while retaining smooth throttle operation, drivability, and the ability to fine tune your idle with the plate position & idle air adjustment screws.
Part# SF-02-500

Function & Form Part# 38100288
Track focused full-bodied coilovers
Variable damping matched with proper spring rates
High-strength JIS G3445 carbon steel shock body
Customizable spring rates
Quick install preload ready

SpeedFactory Magnetic Drain Plugs remove metal shavings and fine metal sludge particles from your engine and transmission fluids, preventing these particles from circulating in the oil for reduced wear and tear on moving internal components.
Part# SF-02-028

Includes an Innovative Mount H-Series Rear-T Bracket 59630 and an OEM p13 H22A Steel Post Bracket (Driver's Side Mount Bracket). Fits most 88-00 Honda Civic, CRX, 90-01 Integra, or 92-00 Prelude with H-Series or F20B M/T Motor swap.

Insane Shafts Part# IS-004
APPLICATION: 88-2001 INTEGRA (DA, DC), CIVIC/CRX/DEL SOL (EF, EG, EK) WITH H-SERIES SWAP. Right Hand (trans) Side.
ENGINE: H22/H23
TRANSMISSION: H-SERIES
INTERMEDIATE SHAFT: NA
Rated at: 500HP

Insane Shafts Part# IS-001
APPLICATION: 88-2001 INTEGRA (DA, DC), CIVIC/CRX/DEL SOL (EF, EG, EK) WITH H-SERIES SWAP. Left Hand (halfshaft) Side.
ENGINE: H22/H23
TRANSMISSION: H-SERIES
INTERMEDIATE SHAFT: H-SERIES (Prelude)
Rated at: 500HP