hybrid-racing
Hybrid Racing Part# DTS-01-03
• More than 80% stiffer spring rate than stock.
• Stronger springs offer direct gear engagement
• Black Zinc Chromate plated for durability
• Suitable for all cars (street and race)
• Combine with gear selector springs for amazing shifts
Add to cart
Hybrid Racing Part# HYB-SAS-01-4
Available in Dust Black or Dust Red
Hybrid Racing Part# HYB-NOB-01-16
Universal Honda/ Acura Thread Pitch
Add to cart
Hybrid Racing Part# HYB-BCA-01-11
Machined Titanium
Stainless Steel Sleeve
Dust Titanium & Blue finish
Includes elastic retaining band
Works with all OEM & aftermarket knobs
M10x1.5 thread
Add to cart
Hybrid Racing Part # HYB-IMR-01-05
• USE a STOCK 02-04 ECU
• Bypass the immobilizer and the multiplex
• Works with the following ECU's PLM, PLR, PND, PNF, PRA, PRB, and PPA.
Add to cart
Hybrid Racing Part # HYB-CMC-01-05
• Helps to eliminate grinds.
• Direct bolt in.
• Smoother shifts.
• Stainless steel brake line.
• Steel internals vs OEM plastic internals.
Add to cart
Hybrid Racing Part # HYB-CAI-01-02
• Full 3"/76mm inner diameter.
• Glass-reinforced silicone construction.
• Designed to keep intake air cold.
• Includes filter and all mounting hardware.
• Stainless steel t-bolt clamp.
• Works with PRB, RBC & RRC manifolds.
• Cleanest intake on the market.
Add to cart
Hybrid Racing Part # HYB-TBR-01-05
• Allows use of RSX shifter and linkage on H-Swap.
• Allows use of Hybrid Racing Bolt-In K-Swap Shifter and Cables.
• Improved performance over OEM H-Series cables and shifter.
• Carbon steel construction with durable powder coat finish.
Hybrid Racing Part # HYB-GRD-01-05
- Shielded, heavy-gauge wire
- Ends are soldered not crimped
- 3 engine/transmission to chassis grounds
- Heavy duty battery ground strap included
Add to cart
Slim design for Increased valve cover to hood clearance.
Designed to be easier to install and remove.
These caps fit all D, B, H, F, J & K valve covers (All Honda and Acura chassis)
Hybrid Racing Part # HYB-OCA-01-04-C
Hybrid Racing Part# HYB-FRL-01-02
Add to cart
Required when doing K-Series swaps. Available applications: 88-91 Civic/ CRX EF*, 92-00 Civic (EG/ EK) & 94-01 Integra DC. Brand new connectors and pins sourced from the same company Honda uses.
-6061 Aluminum
-Anodized Finish
-Chrome-Plated Steel Spherical Bearing
-Easy Installation

HR Part # HYB-SAS-01-06
• Shift knob not included with shifter
• Stainless Steel and Aluminum Construction
• Adjustable throw from 90%-40% of stock throw for both front/back and left/right motion
• Knob is height adjustable
• Central shaft features unique splined design for added knob placement adjustability
• Designed to use stock RSX or Hybrid Racing shift linkage
• 432 Possible Configurations!
• Accepts M10x1.5 shift knobs (standard Honda/Acura shift knob thread)

Add to cart
Hybrid Racing Part # HYB-CLI-01-06
Intended for Left Hand Drive (US SPEC) applications
Add to cart
Hybrid Racing K-series Clutch Line Kits work for the following applications: 92-95 Honda Civic, 96-00 Honda Civic, and 94-01 Acura Integra. Part # HYB-CLI-01-02-C
Hybrid Racing Part# HYB-TSA-01-01
The Hybrid Racing thermostat housing was designed for customers looking for OEM quality parts that function beyond the constraints of factory parameters. The sculpted housing is machined from billet aluminum and then treated to a high-quality black anodized finish. This thermostat housing is adjustable, allowing it to fit many engine and radiator combinations.
Add to cart
Hybrid Racing Part # HYB-SCA-01-15
• Solid and Precise Shifts
• Eliminate Miss Shifts & Gear Grinds
• Replaces Sloppy OEM 02-05 Civic Si EP3 shifter cables (K-series)
• Solid rod ends (no rubber like OEM cables)
• Billet aluminum bushings (no rubber like OEM cables)
• Stainless steel cables and cable guides
• High heat wrap & wire reinforced sleeve
• This is for a set of 2 cables, clips, transmission springs
Add to cart