Hybrid Racing Part# HYB-TBR-01-10
-Mounts shifter cables to the front of K-Series trans.
-Use for RWD K-Series applications
-Must use DC5 style cables & K20 transmission.
-Carbon steel construction with durable powder coat finish.
-Hardware & spacer included
Add to cart
Hybrid Racing Part # HYB-SCA-01-05
• Replaces OEM RSX shifter cables
• Solid rod ends (no rubber like OEM cables)
• Billet aluminum bushings
• Stainless steel cables and cable guides
• High heat, wire reinforced sleeve
• This is for a set of 2 cables.
Add to cart
Hybrid Racing Part # HYB-SCA-01-10
• Replaces OEM 8th gen shifter cables (K-series and R-series)
• Solid rod ends (no rubber like OEM cables)
• Billet aluminum bushings
• Stainless steel cables and cable guides
• High heat wrap & wire reinforced sleeve
• This is for a set of 2 cables, clips, transmission springs
Add to cart

Hybrid Racing Part# HYB-LTT-01-15
-LOW Temp (68*C/154.4*F)
-Ideal for racing cars
-Reduces temp hunting
-OEM Quality Made in Japan

Add to cart
Hybrid Racing Part # HYB-SAS-01-21
• MIND BLOWING PRECISE SHIFTS
• 10%-50% adjustable throw reduction
• 10%-50% adjustable gate spacing
• Adjustable shift knob height.
• Ball Bearings for fluid motion
• Stainless steel shift rod & hardware.
• Laser cut, powder coated frame.
• Updated spring rates
• 6061 Aluminum
• Black Anodized Finish
• Chrome-Plated Steel Spherical Bearing
• Easy Installation
Hybrid Racing Part # HYB-SAS-01-25
• Adjustable front/back throw from 20-50% below stock.
• Anodized billet aluminum & stainless steel construction.
• Sealed ball bearings for reduced friction.
• 1" of height adjustability.
• Silver zinc plated springs.
• Stainless steel hardware.
Add to cart
HR Part # HYB-SAS-01-17
• Smooth, precise and direct shifts
• Adjustable Left/Right Throw from 10-50% Below Stock
• Adjustable Front/Back Throw from 10-50% Below Stock
• Anodized Billet Aluminum & Stainless Steel construction
• New sealed ball bearings that reduce friction
• Lighter & stronger than the V1 shifter
• Race tested for durability & reliability
• 1.5 Inches of height adjustability
• Silver Zinc plated springs
• Stainless steel hardware
• Unique laser etched anodized aluminum plaque
Add to cart
Hybrid Racing Part# HYB-BUN-01-88
Helps to eliminate grinds during hard shifts
OEM Honda master cylinder
Stainless steel braided clutch line
Improves the feel of gear changes
OEM Slave Cylinder (NON-DAMPENED)
Add to cart
Hybrid Racing Part # HYB-FPR-00-05
• Piston-type design provides pressure damping
• Teflon coated, hard anodized, 6061 aluminum construction
• Stainless steel cap and hardware
• -8 Inlet/Outlet Ports
• -6 Return Port
• 1/8 NPT gauge port
• Includes all fittings needed to attach to -6AN fuel lines
• Includes mounting hardware
• Adjustable from 30PSI - 100PSI
Add to cart
Hybrid Racing Part # HYB-SAS-01-11
For K-Series Engine; w/ K20Z3 Style Transmission
• Utilize stock K20Z3 transmission and stock shifter cables.
• NO CUTTING or random parts to buy.
• Hundreds of adjustable positions
• Stainless steel & aluminum consturction
Add to cart
Hybrid Racing Part # HYB-FPG-01-02
Accurate view fuel pressures between 0-100 psi.
Steel case with clean matte black finish and HR Green needle.
Add to cart
Hybrid Racing Part# HYB-CES-01-05
"Blown" Tip Style
Full 304 Stainless Steel
Includes controllable electronic valve
Dry carbon fiber rear valence panel
Bespoke mufflers and custom flanges
Add to cart
Hybrid Racing Part # HYB-VSF-01-02
6" to 3" velocity stack reducer
Designed to improve airflow into your intake
Durable, light weight injection molded construction
7.5" wide, 5" tall cone filter included
6" diameter hose clamp included
Add to cart
Hybrid Racing Part # HYB-VSF-01-04
6" to 3.5" velocity stack reducer
Designed to improve airflow into your intake
Durable, light weight injection molded construction
7.5" wide, 5" tall cone filter included
6" diameter hose clamp included
Add to cart
Hybrid Racing Part # HYB-TBC-00-04
Clean up your radiator hoses and engine bay.
Won't chew up rubber like worm clamps.
Sold in packs of 2
Most applications need 2 or 4.
Adjustable from 31mm to 36mm
Made of Stainless Steel
Add to cart
Hybrid Racing Part # HYB-TBC-00-02
Clean up your engine bay.
Won't chew up rubber like worm clamps.
Sold in packs of 2
Most applications need 2 or 4.
Adjustable from 37mm to 42mm
Made of Stainless Steel
Add to cart
Hybrid Racing Part # HYB-FIL-00-04
A simple 100 Micron Universal Fuel Filter with -6AN fittings on each side.
Add to cart