Hybrid Racing Part # HYB-CAI-01-14
Full Silicone Construction
Most powerful RSX Intake on the market
True 3-inch tube design
Includes 3" velocity stack & filter
Requires the use of 70mm TB
Requires the RBC / RRC intake manifold

Hybrid Racing Part # HYB-CAI-01-10
Full Silicone Construction
Most powerful 8th Gen intake on the market
Built-In Air Bypass helps to prevent hydro-locking
Includes 3.5" velocity stack & filter
Includes battery relocation kit
Comes with couplers for large and small throttle bodies
Requires tuning software like FlashPro

Hybrid Racing Part# HYB-BUN-01-04
-Utilize stock K20Z3 transmission.
-NO CUTTING or random parts to buy.
-Hundreds of adjustable positions.
-Stainless steel & aluminum construction.
-Solid rod ends and spherical bearings (not rubber like OEM cables).
-Stainless steel cables and cable guides.
-High heat, wire-reinforced sleeve.
-This is for a set of 2 cables.

Hybrid Racing Part# HYB-DIP-01-08 (red)/ HYB-DIP-01-06 (black)

Hybrid Racing Part# HYB-SMP-01-05
Anodized billet aluminum
Fits EF/EG/EK/DA/DC
Mounts DC5 shifter directly to chassis
Rubber lower seal
Includes all stainless hardware
Race tested

Hybrid Racing Part# HYB-SCA-01-30
-Replaces OEM Shifter Cables
-Solid rod ends and spherical bearings (unlike OEM rubber)
-Machined & Anodized Billet end links
-Stainless steel core and core guides
-High heat, wire-reinforced sleeve
-Permanently lubricated core

Hybrid Racing Part# HYB-SAS-01-32 (Red), HYB-SAS-01-31 (Black)
Smooth, precise and direct shifts!
Adjusts from inside of the car!
Anodized Billet Aluminum & Stainless Steel construction.
Sealed ball bearings that reduce friction
Race tested for durability & reliability
10-40% Adjustable throw

Hybrid Racing Part# HYB-SRB-01
Direct replacement, Black anodized aluminum with laser etching.
Includes all necessary hardware, Reduces unwanted linkage movement and Increases linkage stability.

Hybrid Racing Part# BCA-01-10
-Machined Aluminum
-Stainless Steel Sleeve
-Three-stage finish with anodizing
-Includes elastic retaining band
-Works with most OEM & aftermarket knobs
-M10x1.5 thread

Hybrid Racing Part# HYB-DWH-00-01
Universal fitment used to mount your Hybrid Racing shifter and or any other item. High-quality bolts and washers; sold in packs of 4.

Hybrid Racing Part# HYB-DWH-00-02
Universal fitment used to mount your Hybrid Racing shifter and or any other item. High-quality bolts and washers; sold in packs of 4.

Hybrid Racing Part# HYB-CCP-01-05

Hybrid Racing Part# HYB-CCP-01-11

Hybrid Racing Part# HYB-NOB-01-17
Brushed Stainless Steel - Countersunk

Hybrid Racing Part# HYB-NOB-01-18
Brushed Stainless Steel - Standard

Hybrid Racing Part # BUN-01-02
• Must have for Kswaps!
• Easy to install.

Hybrid Racing Part # HYB-SAS-01-16
 The 1st and only fully adjustable shifter for the 8th Gen Civic.
• MIND BLOWING PRECISE SHIFTS.
• Adjustable Left/Right Throw from 10-50% Below Stock.
• Adjustable Front/Back Throw from 10-50% Below Stock.
• All Metal Construction, WIth Oil Impregnated Bronze Bushings.
• 12 Months of grueling design, testing, redesign and more testing.
• 1,250,000 Shifts on our automated test rig.
• 1.5 Inches of height adjust ability.
• A6 Steel and 6061-T6 Aluminum Construction

Hybrid Racing Part# HYB-SCB-01-05
-Replace worn plastic with Delrin
-Fits RSX & EM2/ES1 shifter cables
-Easy install, includes new cotter pins
-Inexpensive way to improve shifting feel