The Accord/Prelude chassis has a slight variation from other chassis.
- It has an M12 fitting on the master cylinder side (you can verify by using a 12mm wrench to remove the line)
- And sometimes a M10 or M12 on the slave side (you can verify by using a 12mm or 10mm wrench to remove the line)
Simple install, comes with everything necessary!
- Low profile straight banjo on the clutch master side
- Straight clutch fitting on the slave side
- 58 inches is about average for H-series
- Includes Banjo bolt and washers
- Replaces the whole factory line from master to slave cylinder
- Steel braided line with black teflon coating
Note: This Accord & Prelude Clutch line kit will fit all H-Series engines. The Accord/Prelude chassis has a slight variation from other chassis.
