Included with this kit:
4 Nippon Racing Honda/Acura JDM P73 Pistons
Eagle High Strength Steel Forged H-Beam Rods with ARP 2000 Alloy Rod Bolts
NPR Gas Nitrite N-51 Coated Racing Piston Rings**
High Strength case Hardened 9310 Steel Wrist Pins
8 Hardened Spiral Lock Wrist Pin Clips
1 Packet of ARP Molly thread Lubricant
Nippon Racing JDM P73 Pistons are Heat Treated and come with a Ceramic Hard Anodized Surface Down to the Second Ring Groove to Improve Heat Dissipation as well as use with Nitrous. These Pistons are equipped with 4 Cryogenically heat treated 21MM wrist pis and teflon coated skirts.
ALll Nippon Racing Piston sets are weight matched to +/- 1 gram. Nippon Racing pistons have deeper valve pockets than traditional P73 pistons to allow the use of performance cams up to Stage 3. These are true high performance racing pistons with a rating of 600 HP.
New addition, Rod housing has been expanded so there is no need for custom milled rods with these pistons
COMPRESSION RATIOS ARE AS FOLLOWS:
81MM B18A/B W/PR3 HEAD 11.8:1
81M B18A/B W/P72 HEAD 12:1
81MM B18C W/PR3 HEAD 11.4:1
81MM B18C W/P72 HEAD 11.7:1
Add .02 for every .50mm in Increased Diameter
This kit will fit all 81-84mm bore B-Series engines.
These pistons are designed only for NA applications.
We utilize NPR rings as they are OEM for most of the worlds Engines.**
Do not be fooled by imitation pistons. Nippon Racing Pistons are Made from a High Quality Proprietary Aluminum Alloy we have developed after years of racing import cars and building engines.
These pistons come with an extra lubrication slot on the wrist pin, for pin lubrication that is far superior to less expensive units.This is done to prevent pin damage under extreme pressure.
Eagle's commitment to quality and service has resulted in customer loyalty and satisfaction. This, in turn, has fueled rapid growth over the years. Eagle added crankshafts to our lineup a few years later as well as expanding our offerings in connecting rods. Continuous design improvements and improvements in materials and manufacturing techniques have resulted in Eagle being the largest and most respected aftermarket connecting rod and crank manufacturer in the industry. We never stop researching ways to make our products lighter, stronger, more efficient to manufacture, and more diverse. When you stop moving forward, you get passed by the competition.
JDM Nippon Racing ITR P73 Pistons with Teflon Coated Skirts Fits Honda B16A B16B B16A2, B17A, B18A/B, B18C (GS-R or B18C5 Type-R).Ring Combo Includes Full Floating Piston Set, Ring Set and Scat Rods.
Note for Compression Estimates not listed please use the following calculator (choose JDM P73 as the piston type).
https://www.zealautowerks.com/bseries.html
**Rings may be substituted for GNH or Hastings depending on availability
