92-95 Honda Civic/ Del Sol or 94-01 Acura Integra H-Series engine harness modified for your new swap. Will also work for H2B Swaps.
This H (H22/H23) or F (F20B/Accord) Mil-spec wire harness is cross-compatible with both engine types.
The distributor connections are setup for internal coil distributors only. CAN NOT USE EXTERNAL COIL.
This harness uses Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Standard wall ethylene-tetrafluoroehtylene (ETFE) insulation ( also known as Tefzel ) designed for aerospace applications where weight, dimensional tolerance, and mechanical durability are required. This wire exhibits high chemical and radiation resistance.
Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering.
All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations.
All engine harnesses are made with OBD1 (92-95) Computer Connectors. A Computer adapter can be used for OBD2 computer's if necessary however our harness does not support USDM OBD2 computer's. Aftermarket computer's using OBD2 plugs and Non-US OBD2 computer's are compatible (except for H22 and GSR stock computers).
Each harness will come with a custom back side sub-harness that will be proprietary to the chassis you choose on the drop down menu. This way if you ever change chassis you will only need a new sub-harness, not a whole new wire loom!
The engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!
MADE IN THE U.S.A.
HARNESS CONNECTOR LIST:
• Oil Pressure Sending Unit • Knock Sensor(Round Style)
• Intake Air Temperature (Intake Manifold Style)
• Oxygen Sensor (Primary 4 Wire) • Alternator • 2 Extra Wires
• Injector 1-4 • MAP Sensor • TPS (Throttle position)
• Idle Control Motor • Electronic Speed Sensor • Ground
• Fan Switch • OBD1 Distributor plugs
• h20 Sending Unit (for Gauge Cluster)
• Reverse Lights • Engine Coolant Temp • Starter Signal
• VTEC Solenoid • OBD1 Computer Plugs A,B,D • Power Distribution Cap
For other application please purchase an H-Series Mil-Spec Harness.
Please Note that we only do harness for M/T Swaps. H-Series Swap Harness' are compatible with the following ECU's: P28/ P30/ P72 (with Hondata). Other ECU's may require further harness modification or may not be compatible. Please allow 1-2 weeks for this harness to be completed from the time we receive both your payment.
